Pen Drive Solution

How to Fix or Repair corrupted pen drive or SD Card Without any Software

how to repair corrupted memory card not detected How to Fix or Repair corrupted pen drive or SD Card Without any Software How to Fix or Repair corrupted pen drive or SD Card Without any Software thumbnail
Written by NUR BAHAR LASKAR

Corrupted pen drive and SD Card

It is the very panic moment when you connect your important data loaded pen drive or SD card with computer and you cannot access the pen drive or SD card, and the data inside it and you cannot open your pen drive or SD card.

When you see the pen drive storage inside my computer of your computer, then you do not get the volume level and it shows without volume. See in the marked section no 1 in the below screenshot.

And when you try to open your pen drive then you get an error message that is “Please insert a disk into (H/I/K)”. See in the marked section no 2 in the below screenshot.

How-to-Fix-or-Repair-corrupted-pen-drive-or-SD-Card-Without-any-Software-1 how to repair corrupted memory card not detected How to Fix or Repair corrupted pen drive or SD Card Without any Software How to Fix or Repair corrupted pen drive or SD Card Without any Software 1

 

This type of corrupted error you may get or you will get some other corrupted errors, which are similar to these two errors. This type of error does not mean that your pen drive or SD card is fully corrupted and you nothing to do to fix or recovery your pen drive or SD card.

So don’t worry when you will get this type of error then you follow the below guides to fix your pen drive or SD card from this type of errors.

Why pen drive or SD Card is corrupted

The pen drives or SD card are composed of a number of small electronic particles and some microparticles. If we make changes on pen drive by physically or by any other source then the internal particles will not work then you will get your pen drive or SD card is corrupted.

If you carry the pen drive or SD card in your pocket then if the pen drive or SD card get pressed hardly then it will be corrupted.

Mostly the pen drive or SD card is corrupted when it gets pressed hardly then it will corrupt.

Like that, many other reasons are there for that your pen drive or SD card is corrupted

So care for this type of causes and prevent your pen drive and SD card from being corrupted.

Solution

Here in this tutorial, I am going to explain with you to Fix or Repair corrupted pen drive or SD Card Without any Software. By this tutorial, you can easily fix this type of errors.  Here I am going to guide you with the easiest process, which must work to fix your problem.

If you decide to throughout your pen drive then once you try this tutorial, I hope you will no need to throughout your pen drive.

To reduce the risk or mistake, you must read the full tutorial first then will go to proceeds.

If you will do any type of mistake, I am not responsible for that.

So let start the tutorial.

Tutorial

Fix the pen drive or SD card by using CMD Custom Command

Remember, Your Pen drive or SD card will be formatted for this tutorial, so dont aspect to get the data but pen drive or SD card will be fixed 100% and it will work

You can fix this type of error by using CMD command prompt. So the full solution tutorial is based on CMD command prompt. So

Follow the tutorial step by step-

  • 1) Connect Your USB Pen drive with Computer:-

First of all, connect your Pen drive with the computer properly. Then follow the next step.

  • 2) Go to search box on your computer-

After Connecting the pen drive with the computer, go to your computer then go to the search box of your computer.

  • 3) Type “cmd” On The Search Box

After going to the search box on your computer type “cmd” inside the search box.

  • 4) Go To CMD Script

After typing cmd inside the search box hit on enter key to go to CMD script, then CMD script will be open as a popup window on your computer. Now the main important step will start from the next step.

“Don’t forget whenever you will type any command, be careful about the spelling mistake of that command, otherwise the command will not work”
  • 5) Now Type the Command “diskpart” and Press Enter Key-

Now type the command diskpart on the CMD script without any type of mistake, See the marked section in the below Screenshot. Now press the enter key, then you will get a new CMD script window.

How-to-Fix-or-Repair-corrupted-pen-drive-or-SD-Card-Without-any-Software-2 how to repair corrupted memory card not detected How to Fix or Repair corrupted pen drive or SD Card Without any Software How to Fix or Repair corrupted pen drive or SD Card Without any Software 2

 

  • 6) Now Type the Command “list disk” and Press The Enter Key To show The List of The Disks –

After getting the new CMD script window, inside it type the command list desk (single space between the two words) without any type of mistake. See the marked section no 1 in the below screenshot. You must type as exact in the below screenshot of marked section no 1. Then press the enter key.

  • 7) Now Type the Command “select disk 0/1/2 etc” and Press The Enter Key To select Your Pen drive or SD Card –

After pressing the enter key, you will get all the Storage Drives which are connected with your computer as disk name as disk 0, disk 1, disk 2, disk 3…….etc. See the marked section no 2 in the below screenshot, it will be exactly as in the screenshot.

Now you need to identify by seeing the storage size, which disk is your connected pen drive.

Here for me, in the screenshot

Disk 0 = My Hard Disk

Disk 1 = My Connected Pen drive

But for you, you need to identify same as me.

Now type the command “select disk 1” (single space between all the three words) to select the pen drive, see in the marked section no 3 in the below screenshot. This command is for me because my pen drive storage name is disk 1, thus I type the command select disk 1(single space between all the three words). For you, just change the disk storage name like instead of disk 1 it may be disk 0, disk 1, disk 2…..etc. It will depend on your pen drive storage name. Now press the enter key to complete the selection of your connected pen drive.

How-to-Fix-or-Repair-corrupted-pen-drive-or-SD-Card-Without-any-Software-3 how to repair corrupted memory card not detected How to Fix or Repair corrupted pen drive or SD Card Without any Software How to Fix or Repair corrupted pen drive or SD Card Without any Software 3

 

  • 8) Now Type the Command “clean” and Press The Enter Key To clean the Pen drive or SD Card-

After selecting the pen drive, now type the command ‘clean’ and press the enter key to clean the pen drive. See the marked section no 4 in the above screenshot.

  • 9) Now Type the Command “convert mbr” and Press The Enter Key To Convert into MBR format-

After clean the pen drive, now type the command “convert mbr” (single space between the two words) and press the enter key to convert your pen drive partition into MBR format. See the marked section no 5 in the above screenshot. This step is very important.

  • 10) Now Type the Command “create partition primary” and Press the Enter Key To Create a Brand New partition-

After converting into MBR format, now type the command “create partition primary” (single space between all the three words) and press the enter key to create a brand new partition. See the marked section no 6 in the above screenshot.

  • 11) Now Type the Command “format fs=fat32 quick” and Press The Enter Key to format the Pan drive or SD Card-

After creating the brand new partition, now type the command “format fs=fat32 quick” and press the enter key to quick format the pen drive. See the marked section no 7 in the above screenshot.

Now the fixing process is almost completed. After formatting, if the pen drive is automatically opened then type exit and press the enter key to complete the process, otherwise follow the next step.
  • 12) Now To Change The Drive Name

After formatting, now to change the drive name, suppose if you want to change the drive name like G to H or others then follow the two steps-

(a)Type the Command “active” and Press Enter Key-

As see the marked section no 8 in the above screenshot.

(b) Type the Command “assign” and Press Enter Key-

As see the marked section no 9 in the above screenshot.

  • 14) Now Type the Command “exit” and Press The Enter Key To Exit From The Entire Process-

Now all the process of fixing is completed. Now type the command exit to close the CMD script and exit from the fixing process.

Now your problem is fixed permanently

Enjoy.

If any type of difficulties or queries you have then directly comment on the below comment box and I am always live active to solve your problems.

Thanks by NUR BAHAR LASKAR

 

You Can Also Read⇓

How to Fix Data is Not Showing inside USB Pen Drive

How To Solve Msvcp100.dll Not Found or Missing Errors on Windows 10/8/7

How to Delete Any Undeletable Files and Folders from Your Windows Computer

How to fix The Boot Selection Failed Because a Required Device is Inaccessible

How to Fix or Repair corrupted pen drive or SD Card Without any Software was last modified: by

About the author

NUR BAHAR LASKAR

NUR BAHAR LASKAR is the owner of wayforsolution.com and writer on various technology solution like mobile and computer etc. He is a B.Tech in Computer Science and engineering student.

1 Comment

Leave a Comment

wayforsolution.com

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!